MVMAC

AMA Club Charter #1466

AMA Today Click Banner above to go to the AMA website.

 

FaceBook - MVMAC Group

Facebook Come join the club on Facebook. If you have a Facebook account you can become a member of the Mesilla Valley Model Airplane Club - MVMAC group - Just click here.

 

Club Instruction

Without doubt this is the best method of rc airplane flight training, and is the option you should choose if you want to jump in at the deep end with an IC airplane, rather than electric power, and you have no experience whatsoever.

Our club has experienced rc pilots who are willing to teach.

If learning to fly rc airplanes at a club, there are a few methods that you'll likely encounter...

The first one is the traditional method of side-by-side instruction, either by sharing a single transmitter or, more commonly, using a buddy box system.

For single transmitter, or 'pass-the-box', instruction your instructor will fly the airplane while talking you through what he's doing, then he'll hand you the transmitter for you to fly the plane. If you get in to difficulty he will take the transmitter from you and regain control of the airplane. When your heart has stopped racing and your hands have stopped shaking, he'll hand back the transmitter and you can have another go.
Although the 'pass-the-box' method is still used, it's become less common since the introduction of the buddy box system...

The buddy box system is a much better way of learning, and you and your instructor each hold a separate transmitter.

In conventional BB systems the transmitters are joined together by a cable; the instructor holds the master transmitter while you, the student, hold the slave transmitter. With the flick of a switch the instructor can hand over or take away complete control from you, without having to take the transmitter from your hands.

A typical buddy box system

 

The system shown above is a true buddy box system whereby the slave Tx (left) can only ever be used with the master Tx (right). In other words, the slave transmitter is not a real one and cannot transmit an actual radio signal.
But the majority of modern radio control transmitters have a buddy box training capability, so two actual transmitters can be connected to each other and neither of them are 'dummies'.

Whereas a cable connection between the two transmitters is commonplace, modern radios are increasingly incorporating a wireless buddy connection. As with everything, this method will become the norm with time, I'm sure.

For those interested in flight training from some of our more experienced pilots, the following list of members will be available to assist and to teach you on how to fly your airplane.

All new pilot training will be conducted at the MVMAC Las Cruces RC Flying Field for safety purposes. You can contact any of our instructors by phone or check our Event Calendar to come out to any of our public events.

Don't try flying by yourself. Don't crash your plane. If you've never flown before, it is harder then it looks!!!

 

Instructor Contact Aircraft
 Caldwell, James       (575) 680-8195 Trainer for Airplanes
 Gonzales, Rod  (575) 649-1111 Trainer for Airplanes
 Gerard DeLong  (575) 202-7400 Trainer for Airplanes
 Bill Grigaliunas  (575) 521-0003

Trainer for Airplanes

 Michael Moore  (575) 635-5178 Trainer for Airplanes